Programming via XML interface
10.3 XML commands
SIMATIC RF650R/RF680R/RF685R
200 Configuration Manual, 03/2018, C79000-G8976-C386-06
value_id Decimal value
0...4294967295 Unique command identifier
value_configData CDATA -- Configuration data
The parameter must be embedded in a
value_configID Alphanumeric text -- Unique identifier of the transferred
configuration
The ID can also be read out with the
"getConfigVersion" command.
This command requests the configuration stored on the reader.
You can also export the configuration to transfer it to other readers.
<resultCode> 0 </resultCode>
<configID> value_configID </configID>
<![CDATA[value_configData]]>
The error codes for negative replies ("resultCode" ≠0) are described in the section "Negative
XML replies (Page 263)".