Configuring with the WBM
7.2 The WBM
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 03/2018, C79000-G8976-C386-06
43
Using the WBM, you can configure the SIMATIC RF650R/RF680R/RF685R readers.
Security recommendation: Enable user management
After starting the WBM the first time, no user management is enabled. To make sure that
no unauthorized persons can access the reader settings, we recommend that you enable
the user management and create new user profiles after the first login.
For further information on logging in to WBM and creating/deleting user profiles, refer to the
section "The "User management" menu item (Page 102)".
Remember that simultaneous access to a reader using two browsers is possible but not
recommended.
If changes are made when two browsers are accessing a reader at the same time, this can
lead to errors in the configuration or to an undesired result.
When you have created new user profiles you need to log in with one of these user profiles
when you restart the WBM.
To Next Page
Loading...
Need help?
General