Siemens SIMATIC RF650R

Programming via Rockwell controller
9.5 Programming add-on instructions
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 03/2018, C79000-G8976-C386-06
171
Name
Type
Comment
filterDataAvailable
BYTE
0=false; 1=true
1)
Inventoried
WORD
2)
TAG_DATA[2]
IID_IN_1_81
...
...
TAG_DATA[n]
IID_IN_1_81
1)
Indicates whether the filter criteria could be read.
2)
Indicates how often the transponder was identified via the air interface before it changed to the "Observed" status.
9.5.2.3
Read_EPC_Mem
The "Read_EPC_Mem" block reads data from the EPC memory of the RF600 transponder.
Access is to bank 1 as of the start address 4. The length of the EPC memory to be read out
is specified by the "LEN_DATA" parameter.
Figure 9-10 "Read_EPC_Mem" block