Programming via Rockwell controller
9.5 Programming add-on instructions
SIMATIC RF650R/RF680R/RF685R
170 Configuration Manual, 03/2018, C79000-G8976-C386-06
Select at least as high a number of "TAG_DATA[x]" elements of the data types
(ATTRIBUTES "0x80" and "0x81") as the number of transponders to be expected. Note the
following points when creating the receive buffer "IDENT_DATA"/data type:
● The first element "NUM_IDS" is always of the type "WORD".
● The next element "TAG_DATA" is always of the type "ARRAY". The number of
transponders to be expected ("n") must be entered in the "ARRAY".
The following tables show an example of the structure of the receive buffer
"IDENT_DATA"/data type for the ATTRIBUTES "0x80" and "0x81".
Table 9- 11 ATTRIBUTE "0x80"
ARRAY[1..n] of
IID IN I 80
Table 9- 12 ATTRIBUTE "0x81"
ARRAY[1..n] of
IID IN I 81
channel; 1..15_ETSI; 1..53:FCC
antenna; bit coded;
Bit 0=antenna 1; Bit 1=antenna 2; ...
0=undefined; 1=circular; 2=vertical linear;