Programming via Rockwell controller
9.7 Digital inputs/outputs
SIMATIC RF650R/RF680R/RF685R
184 Configuration Manual, 03/2018, C79000-G8976-C386-06
The sending of chained commands with Rockwell controllers functions in exactly the same
was as with S7 controllers. You will find a description of how commands are chained in the
section "Chaining (Page 145)".
The Ident profile supports command repetition (Repeat command). Command repetition with
Rockwell controllers functions in exactly the same was as with S7 controllers. You will find a
description of command repetition in the section "Command repetition (Page 148)".
The structure and the way digital inputs/outputs work with Rockwell controllers is identical to
the structure and the way they work with S7 controllers. You will find a description of digital
inputs/outputs in the section "Digital inputs/outputs (Page 153)".
To Next Page
Loading...
