Siemens SIMATIC RF650R User Manual

Programming via Rockwell controller
9.5 Programming add-on instructions
SIMATIC RF650R/RF680R/RF685R
174 Configuration Manual, 03/2018, C79000-G8976-C386-06
Table 9- 15 Parameter values
PARMID
(hex)
PARMID
(ASCII)
Parameter
VALUE
0x41315057
A1PW
Antenna 01: Radiated power
Range of values: 0.5 ... 33
Increment: 0.25
Radiated power of the antenna in
[dBm].
Bytes 1 and 2 are not used, byte 3
represents the integer and byte 4
the decimal place.
Example: A radiated power of
10.25 dBm represents a "VALUE"
of "0x0A19".
0x41325057 A2PW Antenna 02: Radiated power
0x41335057
A3PW
Antenna 03: Radiated power
0x41345057 A4PW Antenna 04: Radiated power
0x41315452
A1TR
Antenna 01: RSSI threshold
Range of values: 0 ... 255
Threshold value for RSSI.
Transponders with lower values are
discarded. Value without unit with-
out a direct relationship with the
radiated power.
0x41325452
A2TR
Antenna 02: RSSI threshold
0x41335452
A3TR
Antenna 03: RSSI threshold
0x41345452 A4TR Antenna 04: RSSI threshold
0x5331444C
S1DL
Read point 01: RSSI delta
Range of values: 0 ... 255
Difference for RSSI values.
Transponders with lower values
relative to the transponder with the
highest RSSI value are discarded.
Value without unit without a direct
relationship with the radiated pow-
er.
0x5332444C
S2DL
Read point 02: RSSI delta
0x5333444C
S3DL
Read point 03: RSSI delta
0x5334444C S4DL Read point 04: RSSI delta
0x4131504F
A1PO
Antenna 01: Polarization
Range of values: 0, 1, 2, 4
Polarization of the antenna (for
intelligent antennas e.g. internal
antenna RF685R)
• 0: default, undefined
• 1: circular
• 2: vertical linear
• 4: horizontal linear
Input is bit coded. Combinations
are possible (adding values).
0x4132504F A2PO Antenna 02: Polarization
0x4133504F
A3PO
Antenna 03: Polarization
0x4134504F A4PO Antenna 04: Polarization

Siemens SIMATIC RF650R Specifications

General

Brand	Siemens
Model	SIMATIC RF650R
Category	Other
Language	English