Siemens SIMATIC RF650R

Programming via XML interface
10.3 XML commands
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 03/2018, C79000-G8976-C386-06
209
Possible values of the "value_name" parameter
name
value
objType
objName
Description
Power 0, 5.00...33.00 Antenna Antenna01
Antenna02
Antenna03
Antenna04
Radiated power of the antenna
in [dB]
Increment: 0.25 dB
RssiThreshold 0...255 Antenna Antenna01
Antenna02
Antenna03
Antenna04
RSSI threshold value
Transponders with lower RSSI
values are not taken into ac-
count.
This is a value without a unit
and without direct reference to
the power strength.
Polarization Default
Circular
Linear_vertical
Linear_
horizontal
All
Antenna Antenna01
Antenna02
Antenna03
Antenna04
Polarization of the antenna
Currently, this parameter can
only be set for the internal an-
tenna of the RF685R.
RssiDelta 0...255 Source See descrip-
tion
Difference for RSSI values
Maximum difference compared
with the RSSI value of the tran-
sponder with the highest RSSI
value that the transponders can
have and still be processed.
This is a value without a unit
and without direct reference to
the power strength.
"objName" must have the name
of the corresponding read point.
Modula-
tionScheme
32, 33, 34, 35,
37, 65
General General Modulation scheme of the read
point
This also specifies which tran-
sponder types are identified
(ISO 18000-62/-63).