Siemens SIMATIC S7-1500T Operating Instructions

CPU 1505SP (F) Ready4Linux Version 2.7
Operating Instructions, 05/2019, A5E46864285-AA
15
Product overview
3
3.1 Different properties between Windows and Linux variants
Because of the different modes of operation of the Windows and Linux operating systems
there are also differences in the operation and operator control of the CPU. The following
table provides an overview of both versions.
Functions
Windows
Linux
Operating system restart ✓ A Linux restart is not sup-
ported while the CPU is
running. Refer to the section
"CPU behavior when shut-
ting down the operating
system (Page 75)".
Configuration files import
✓
-
CPU display
✓
-
PC Station Plus
✓
-
Replacement part case (V2.6 projects can be
loaded)
✓ -
Retentive memory
• PC mass storage
• NVRAM
• Only NVRAM
Independent power supply (UPS) ✓ Automatic shutdown of Linux
and saving of data including
retentive data is not support-
ed.
Saving of retentive data is
possible when the CPU is
shutdown properly.
Hardware configuration in STEP 7 ✓ The default values must not
be changed.
✓
Function is possible
-
Function is not possible
To operate the CPU under Linux, further command-line commands are available:
● MemoryReset
● FactoryReset

Siemens SIMATIC S7-1500T Specifications

General

Brand	Siemens
Model	SIMATIC S7-1500T
Category	Controller
Language	English