Siemens SIMATIC S7-1500T Operating Instructions

CPU 1505SP (F) Ready4Linux Version 2.7
6 Operating Instructions, 05/2019, A5E46864285-AA
Documentation guide
1
1.1 Guide for these operating instructions
Purpose of the documentation
These operating instructions supplement the system manual of the S7-1500 automation
system as well as the function manuals. Cross-system functions are described in the system
manual.
The information provided in these operating instructions and the system manual enables you
to commission the CPU.
Basic knowledge required
The following knowledge is required in order to understand the documentation:
● General knowledge of automation technology
● Knowledge of the SIMATIC industrial automation system
● Knowledge of working with STEP 7
● Knowledge of working with Linux
Validity of the documentation
This documentation is valid for the following products:
CPU
Article number
1505SP 6ES7 672-5DC11-0YA0
1505SP F
6ES7 672-5SC11-0YA0
Notes
Please also observe notes marked as follows:
Note
A note contains important information on the product described in the documentation, on the
handling of the product or on
the part of the documentation to which particular attention
should be paid.

Siemens SIMATIC S7-1500T Specifications

General

Brand	Siemens
Model	SIMATIC S7-1500T
Category	Controller
Language	English