Siemens SIMOTICS S-1FL6 Compact Operating Instructions

Getting Started
A5E37208904-003, 04/2017
61
Display
Example
Description
Data Read-only parameter group
Func
Function group
JOG
JOG function
Save
Save data in drive
defu Restore drive to default settings
dr--sd
Save data from drive to micro SD card/SD card
sd--dr
Upload data from micro SD card/SD card to drive
Update
Update firmware
ABS The zero position has not been set
A.B.S.
The zero position has been set
r xxx
Actual speed (positive direction)
r -xxx
Actual speed (negative direction)
T x.x Actual torque (positive direction)
T -x.x
Actual torque (negative direction)
xxxxxx
Actual position (positive direction)
xxxxxx. Actual position (negative direction)
DCxxx.x Actual DC link voltage
Exxxxx
Position following error
run
The motor is running
Con
The communication between the commissioning tool
SINAMICS V-ASSISTANT and the servo drive is established.
In this case, the BOP is protected from any operations except
clearing alarms and acknowledging faults.

Siemens SIMOTICS S-1FL6 Specifications

General

Brand	Siemens
Model	SIMOTICS S-1FL6
Category	Servo Drives
Language	English