Siemens SIMOTICS S-1FL6

Connecting
4.4 24 V power supply/STO
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 04/2019, A5E36037884-007
163
Assembling the 24 V power supply and STO cable terminals
The procedure of assembling a 24 V power cable terminal or an STO cable terminal is the
same as that for a power cable terminal on the drive side of the V90 200 V servo drives.
For more information, see Section "Assembly of cable terminals/connectors on the drive side
(Page 411)".
Plugging the 24 V power supply and STO cables