Siemens SIMOTICS S-1FL6 User Manual

Appendix
A.1 Cable assembly
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 04/2019, A5E36037884-007
421
A.1.2.3
Brake connector assembly
Brake cable used for low inertia motors (SH20, SH30, SH40)
The assembly of a brake terminal follows the procedure as described for a power connector.
See Section "Power connector assembly (Page 414)" for details.
Brake cable used for motors with straight connectors (low inertia motors SH50 and high
inertia motors)
The assembly of a brake terminal follows the procedure as described for an encoder
connector used for motors with straight connectors. See Section "Encoder connector
assembly (Page 417)" for details.
Brake cable used for motors with angular connectors (low inertia motors SH50 and high
inertia motors)
The assembly of a brake terminal follows the procedure as described for an encoder
connector used for motors with angular connectors. See Section "Encoder connector
assembly (Page 417)" for details.

Siemens SIMOTICS S-1FL6 Specifications

General

Brand	Siemens
Model	SIMOTICS S-1FL6
Category	Servo Drives
Language	English