Siemens SIMOTICS S-1FL6

Basic operator panel (BOP)
6.5 Auxiliary functions
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 04/2019, A5E36037884-007
199
6.5
Auxiliary functions
Totally, there are nine BOP functions available.
①
Jog
⑥
Update firmware
②
Save parameter set in drive
⑦
Adjust AI1 offset
③
Restore parameter values to default
⑧
Adjust AI2 offset
④
Copy parameter set from drive to a micro
SD card/SD card
⑨
Adjust absolute encoder
NOTE:
This function is available onl
y when the
servo motor with an absolute encoder is
connected.
⑤
Copy parameter set from a micro SD
card/SD card to drive