Diagnostics
11.1 Overview
SINAMICS V90, SIMOTICS S-1FL6
386 Operating Instructions, 04/2019, A5E36037884-007
To acknowledge faults, proceed as follows:
If you do not eliminate the cause(s) of the fault, it can appear again after no button
operation for five seconds. Make sure that you have eliminated the cause(s) of the fault.
You can acknowledge faults using RESET signal. For details of the signal, refer to DIs
(Page 123).
You can acknowledge faults on the SINAMICS V-ASSISTANT. For details, refer to
SINAMICS V-ASSISTANT Online Help.
To Next Page
Loading...
Need help?
General
