Siemens SIMOTICS S-1FL6 User Manual

General information
2.6 Function list
SINAMICS V90, SIMOTICS S-1FL6
60 Operating Instructions, 04/2019, A5E36037884-007
Function
Description
Control mode
Low frequency vibration suppres-
sion (Page 329)
Suppresses the low frequency vibration in the machine
system
IPos
Speed limit (Page 229) Limits motor speed through external analog speed limit
commands (0 - ±10 VDC) or internal speed limit commands
(up to three groups)
PTI, IPos, S, T, Fast
PTI
Torque limit (Page 230) Limits motor torque through external analog torque limit
commands (0 - ±10 VDC) or internal torque limit commands
(up to three groups)
PTI, IPos, S, Fast PTI
Electronic gear ratio (Page 225)
Defines a multiplier factor for input pulses
PTI, IPos, Fast PTI
Basic operator panel (BOP)
(Page 187)
Displays servo status on a 6-digit 7-segment display PTI, IPos, S, T, Fast
PTI
External braking resistor - DCP, R1
(Page 168)
An external braking resistor can be used when the internal
braking resistor is insufficient for regenerative energy
PTI, IPos, S, T, Fast
PTI
Digital inputs/outputs (DIs/DOs)
(Page 122)
Control signals and status signals can be assigned to eight
programmable digital inputs and six digital outputs
PTI, IPos, S, T, Fast
PTI
Smoothing function (Page 224) Transforms position characteristics from the pulse train
input setpoint into an S-curve profile with a parameterized
time constant
PTI, Fast PTI
SINAMICS V-ASSISTANT You can perform parameter settings, test operation, ad-
justment and other operations with a PC
PTI, IPos, S, T, Fast
PTI

Siemens SIMOTICS S-1FL6 Specifications

General

Brand	Siemens
Model	SIMOTICS S-1FL6
Category	Servo Drives
Language	English