Table 4-4 Drilling templates and mounting equipment, FSD … FSF
Frame size D
22 kW … 45 kW
Frame size E
55 kW
Frame size F
75 kW … 132 kW
Drilling pattern
Mounting parts 4 x M5 bolts
4 x M5 nuts
4 x M5 washers
4 x M6 bolts
4 x M6 nuts
4 x M6 washers
4 x M8 bolts
4 x M8 nuts
4 x M8 washers
Locked-rotor
(starting) torque
6 Nm 10 Nm 25 Nm
Mounting on a standard mounting rail (TS 35)
You can mount inverters, frame size
FSAA on a TS 35 standard mounting
rail.
Procedure
Proceed as follows to mount the inverter on a mounting rail:
1. Mount the inverter on the top edge of the mounting rail.
2. Using a screwdriver, actuate the release button on the upper side of the inverter.
3. Continue to actuate the release button until the inverter audibly snaps onto the mounting
rail.
Installing
4.3 Installing the inverter
SINAMICS G120C converter
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34263257B AF 55
To Next Page
Loading...
