4
Machine Operating Area 03.04
4.6 Automatic mode
4
Ó Siemens AG, 2004. All rights reserved
4-144 SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
Execute fr.
hard disk
If a program requires more memory than the NC can provide for
execution, then it can be executed from the hard disk without loading
it completely into the NC.
Other information
Workpieces/part programs that have been loaded to the NC memory
are marked with ("X") in the "Loaded" column in the workpiece/
program overview.
4.6.4 Log: Loading list of the programs
Function
· Error list:
Display of previously loaded programs if errors have occurred
during loading.
Operating sequence
The "Machine" operating area is selected.
Program
overview
The "Program overview" is open.
The softkey bars change.
Log
Select softkey "Log".
The "Job log for program overview" is opened.
To Next Page
Loading...
Need help?
General
