Siemens SINUMERIK 840D Operator's Guide

7
03.04 "Services" Operating Area
7.5 O
p
eration
7
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition 7-383
7.5.3 Reading in data
Function
When reading in archives and files, the following are possible source
areas:
· A device connected to the RS-232 interface (e.g. PC)
· A programming device
· A diskette drive
· Archive (i.e. the "Archives" directory) in the directory tree
(even if it is not displayed under "Data selection")
· The NC card (if a flash file system is formatted on the NC
card)
· When archives are read in, their format (punched tape/PC
format) is recognized automatically.
· Data with longer file names (> 8 + 3 characters) can be read
in from diskette.

Siemens SINUMERIK 840D Specifications

General

Series	SINUMERIK 840D
Axes	Up to 31
Channels	Up to 10
Operating System	Windows-based
Power Supply	24 V DC
Control Unit Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
Interpolation	Spline
PLC	Integrated PLC
Data Storage	CompactFlash, USB