Siemens SINUMERIK 840D

6
"Program" Operating Area 03.04
6.9 Pro
g
ram simulation
6
Ó Siemens AG, 2004. All rights reserved
6-322 SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
2. If individual programs are simulated, the machining list default
produces the correct simulation sequence even if menu item
"Channel/spindle" is not selected (and therefore without applying
the overlay principle).
3. With the correct password you can define manufacturer-specific
default setting values with "Change default" under menu items
"Channel settings" and "Spindle settings", which then apply
globally for all new workpieces.