12/2008 3 Setting up functions
3.4 Fault services
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
3-123
Field Content Type
Calendar field When you select the calendar field,
the calendar opens to display the
current month.
You can navigate through the months
in the calendar via the arrows. Select
a number to use the date as the start
date.
The date is limited to 24 months in
the future and 24 months in the past.
If participation in common start date
is selected, you cannot make any
entries here.
SELECTION
Starting time The starting time for the trigger can
be specified in hours and minutes.
If no entry is made, the current time is
used.
DISPLAY
INPUT
(Time format with
leading zeros)
Common start date If participation in common start date
is selected, the time is automatically
set.
Even if the common start date is
subsequently changed, it is
automatically corrected.
The start date can only be selected if
trigger participates in common start
date is deselected.
DISPLAY
SELECTION
(Toggle)
Next tripping ope-
ration
The next operation is displayed with
date and time so the trigger tripping
time can be checked.
DISPLAY
Interval Content Type
alternatively
- all
- weekly
- monthly
The type of interval must be clearly
selected. You can only select one of
the three options.
DISPLAY
SELECTION
(Toggle)
all Enter a cycle 'n' in the selected time
unit
- Minutes or
- Hours or
- Days
The intervals that can be selected are
restricted to one or more days of the
week, Monday to Friday and a time
window for the selected days of the
week.
The interval runs regardless of the
deselect restriction.
At the end of the interval, the trigger
will be activated in the selected time
DISPLAY
INPUT
SELECTION
(1 to 99,999
minutes or hours)
To Next Page
Loading...
