3 Setting up functions 12/2008
3.4 Fault services
© Siemens AG 2008 All Rights Reserved
3-124 ePS Network Services, Function Manual (FH) - Release 12/2008
Interval Content Type
window of the day and time.
The next interval only starts once the
trigger has been successfully
triggered.
weekly Enter a cycle 'n' in
- Weeks,
by selecting a day of the week from
Monday to Sunday
DISPLAY
INPUT
SELECTION
(1 to 99,999
minutes or hours)
monthly Enter a cycle 'n' in
- Months.
Either by selecting the
- first,
- second,
- third or
- fourth
day of the week from Monday to
Sunday in the month
or
select the day of the month from 1 to
31 (then without day of the week).
DISPLAY
INPUT
SELECTION
(1 to 99,999
minutes or hours)
Last execution
- undefined
This is selected if no restriction is set
for the last execution.
If you deselect undefined, you need
to select a date for the last execution.
DISPLAY
SELECTION
(Toggle)
Last execution
- on
You can only make an entry if
undefined is deselected for the last
execution.
You can only specify a date for the
last execution via the calendar
selection function (see above –
calendar field).
DISPLAY
SELECTION
To Next Page
Loading...
