Siemens SINUMERIK 840Di sl - 5.5.8 Electronic gear

12/2008 6 Management
6.1 Organization management
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
6-229
Field Content Type
Internal name Freely selectable, additional name
of the machine can be the name
used by the end user (inventory
number) or type designation.
DISPLAY
INPUT
(Max. 40 characters;
any character
permissible)
Device class The device class defines which
ePS Network Services can always
be used on a particular machine.
Depending on the device class,
some functions cannot be used
(see Section 7.3 Client
Diagnostics).
SINUMERIK, S7, and IPC are
available in the selection.
DISPLAY
SELECTION
Notice:
It is no longer possible to change
the device class of a machine that
has already been created and has
been connected once.
Company Name of the end user: Machines
can be selected in the machine
tree according to the end user.
Location Specifies the location of the
machine: Machines can be
selected in the machine tree
according to their location.
Production unit Specifies the production unit to
which the machine belongs:
Machines can be selected in the
machine tree according to their
production unit.
DISPLAY
INPUT
(Max. 40 characters,
return, backspace,
°, $, \, ;, >, <, are not
permissible.)
Zip code Entry for the zip code of the
location
DISPLAY
INPUT
(Max. 40 characters;
any character
permissible.)
Country Entering the country (location) of
the machine
DISPLAY
INPUT
(Max. 40 characters;
any character
permissible.)
Comment No comment DISPLAY
INPUT
(Max. 2000
characters; any
character
permissible.)