12/2008 2 Maschine information
2.2 Variable monitors - Measurements and measurement series
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
2-39
"Display" menu
The display settings of the diagram may be controlled using this menu.
Entries menu
Display all data Displays the complete progression over time of
the time series
Between the markings Displays the time domain between the two
markings
Last month
|
|
|
Last year
These options are used to select the zoom
factor. When the zoom level is changed, the
diagram is regenerated to reflect this; however,
all of the other settings (in particular, the
markings) remain the same.
Back to previous zoom Generates the diagram with the previous zoom
setting
Time-based distribution The horizontal axis represents the time. The
measuring points are plotted along this
according to their date.
Equal distribution The measured values are distributed equally
across the X axis; it is not possible to draw any
further conclusions about the time of the
measurement from the points on the X axis.
Delete markings Removes the markings from the diagram.
List of machines and time series with control elements
Fig. 2-20: Displaying/hiding individual measurement series
Function Description
Hide measurement series This function removes the measurement series
graph from the diagram. The diagram is redrawn,
which involves recalculating the scale.
Display limit values This function plots the limit values of the selected
measurement series in a line in the diagram. If the
limit values are outside the range of values
displayed, an icon indicating this will appear.
To Next Page
Loading...
