Siemens SIRIUS 3RM1 - Page 112

Connection
6.1 Connecting the screw-type terminals
SIRIUS 3RM1 motor starter
112 Manual, 06/2016, A5E0345285095020A/RS-AE/005
Step
Operating instruction
Figure
1 Insert the relevant cable into square on the screw
terminal until it engages.
2
Hold the cable in the screw terminal.
3
Tighten the screw with a torque of 0.6 to 0.8 Nm.
4 Pull on the cable to ensure it is screwed tight.