Siemens SIRIUS 3RM1 - Parameterizing the 3 RM1 Motor Starter; Setting the Rated Operational Current; Setting the RESET Method

Operator control and monitoring
7.1 Operator controls
SIRIUS 3RM1 motor starter
126 Manual, 06/2016, A5E0345285095020A/RS-AE/005
7.1.1
Parameterizing the 3RM1 motor starter
All the settings are made directly at the 3RM1 motor starter:
①
Rotary coding switch for rated operational current of the load
②
TEST/RESET/RESET MODE button
Figure 7-1 Front view of the 3RM1 motor starter
7.1.2
Setting the rated operational current
Use a screwdriver to set the load's rated operational current (current setting I
e
) on the rotary
coding switch.
A change takes effect immediately. The sealable cover (accessory) prevents unauthorized
access to the rotary coding switch.
7.1.3
Setting the RESET method
On the 3RM1 motor starter, you can select either manual RESET or auto RESET for
resetting following an overload trip.