"Automatic" configuration is selected if PC is
connected directly to meter.
"Manual" configuration is selected if configura‐
tion is made without any connection to a meter.
Configuration is downloaded to the meter after‐
wards.
A.4 Setting the basic parameters
Note
No factory reset
The device is delivered with factory settings that are not stored as default values. Because no
default values are present in the meter, an automatic return to factory values is not possible.
Flow Tool
A.4 Setting the basic parameters
SITRANS MAG 8000
118 Operating Instructions, 11/2018, A5E03071515-AE
To Next Page
Loading...
