B.5 Result evaluation
The service technicians shall inspect the device parameters on the report and cross-check
with the reference values to evaluate if the device status is of proper quality or not. Reference
values are available in the document "Qualification Certificate Reference Guideline"
(A5E02268573).
See also
Qualification Certificate Reference Guideline (
http://support.automation.siemens.com/WW/
view/en/66867834)
Qualification certificate
B.5 Result evaluation
SITRANS MAG 8000
134 Operating Instructions, 11/2018, A5E03071515-AE
To Next Page
Loading...
