6.2.1 Configuring the device
This chapter describes how to set up the meter for communication with the PC. The options
in both SIMATIC PDM and Flow Tool software are the same; only the views on the PC screen
differ.
Setting up meter
1. Click on "File".
2. Select "New".
3. Assign a new project name in the "Name" box, e.g. MAG8000.
4. In Process Device Network View, right-click on "Net" → select "Insert New Object" →
"MODBUS net".
Commissioning
6.2 Initial commissioning via SIMATIC PDM
SITRANS MAG 8000
Operating Instructions, 11/2018, A5E03071515-AE 43
To Next Page
Loading...
