Param‐
eter ID
Meter
version
Display
view
Parameter/data type Factory settings Data range
Fixed parameter or meter data that are not changeable
208 All - Reset leakage fault No Yes / No
Value is reset to "No" when up‐
loading device parameters to pc
after command execution
209 All - Reset consumption log fault No Yes / No
Value is reset to "No" when up‐
loading device parameters to pc
after command execution
210 All - Insulation alarm output enable No Yes / No
211 All - Insulation fault hours 0
212 All - Insulation fault counter 0
213 All - Insulation fault appears 2000-01-01 T 00:00:00
214 All - Insulation fault disappears 2000-01-01 T 00:00:00
215 All - Coil current alarm output ena‐
ble
Yes Yes / No
216 All - Coil current fault hours 0
217 All - Coil current fault counter 0
218 All - Coil current fault appears 2000-01-01 T 00:00:00
219 All - Coil current fault disappears 2000-01-01 T 00:00:00
220 All - Amplifier alarm output enable Yes Yes / No
221 All - Amplifier fault hours
222 All - Amplifier fault counter
223 All - Amplifier fault appears 2000-01-01 T 00:00:00
224 All - Amplifier fault disappears 2000-01-01 T 00:00:00
225 All - Database alarm output enable Yes Yes / No
226 All - Database fault hours 0
227 All - Database fault counter 0
228 All - Database fault appears 2000-01-01 T 00:00:00
229 All - Database fault disappears 2000-01-01 T 00:00:00
230 All - Low power alarm output ena‐
ble
Yes Yes / No
231 All - Low power fault hours 0
232 All - Low power fault counter 0
233 All - Low power fault appears 2000-01-01 T 00:00:00
234 All - Low power fault disappears 2000-01-01 T 00:00:00
235 All - Flow overflow alarm output
enable
Yes Yes / No
236 All - Overflow fault hours 0
237 All - Overflow fault counter 0
238 All - Overflow fault appears 2000-01-01 T 00:00:00
239 All - Overflow fault disappears 2000-01-01 T 00:00:00
240 All - Pulse A overload alarm output
enable
Yes Yes / No
Appendix
C.2 Parameter lists
SITRANS MAG 8000
140 Operating Instructions, 11/2018, A5E03071515-AE
To Next Page
Loading...
