Siemens SITRANS F MAG 8000 Standard - Page 39

Encoder interface connection diagram
① Black wire
② Red wire
③ Unshielded wire
④ Endpoint
Figure 5-1 Encoder interface cable connection between MAG 8000 and ITRON 200WP with Itron cable
Connect black wire to terminal 91, red wire to terminal 92 and unshielded wire to terminal 93.
WARNING
Unshielded wire
It is important that unshielded wire does not touch any metal parts of MAG 8000 housing.
Other radio interface cable has to be a 3-wire cable with a shield connected to MAG 8000
housing (mounting cable shield is shown to the right).
GND
Data
129.10.10
① Power clock
② Connect shield to encapsulation
③ Radio interface
128.10.10
Connecting
5.5 Communication modules
SITRANS MAG 8000
Operating Instructions, 11/2018, A5E03071515-AE 39