Index 1
Totalizer 1
Figure 7-6 Operator menu - Totalizer 1
Flow volume totalizer 1 (factory-configured for forward flow calculation).
For MAG 8000, the value of totalizer 1 can be reset to zero or set to any value desired via
PDM or Flow Tool (example - replacing an existing old meter).
Index 2
Totalizer 2
Figure 7-7 Operator menu - Totalizer 2
Flow volume totalizer 2 (factory-configured for reverse flow). A negative value indicates reverse
flow calculation.
For MAG 8000, the value of totalizer 2 can be reset to zero or set to any value desired via
PDM or Flow Tool (example - replacing an existing old meter).
Index 3
Flow rate
Figure 7-8 Operator menu - Flow rate
Index 3 shows actual flow rate. If a negative value is indicated, flow is in reverse direction.
Operation
7.4 Operator menu
SITRANS MAG 8000
64 Operating Instructions, 11/2018, A5E03071515-AE
To Next Page
Loading...
