Fire Safety & Security Products
Building Technologies
1583_o_en_−−_5
66
08.2005
5 User application settings
5.1 Basic facilities
The setting of the user functions of the fire detection system FC330A can be done direct on the panel (as explained under
’User application settings’ page 71) or off−line via the PC-tool SWE330A. The SWE330A allows to save the user config-
uration on disk (backup).
RS232-2
data up /
download
DIRECT via keypad OFF-LINE via configuration tool SWE330A
Windows-PC
S very convenient with extensive online help
S always with data backup on disk
S possible without any service device
offline editing for
S programming
S user functions
S and user texts
direct editing via
keypad and internal
editor to program
user functions and
user text
Platform requirement:
−
WINDOWS−PC, Pentium or higher
− minimum speed 120 MHz
− minimum 32MB RAM
− WIN95/WIN98/WIN98-SE/WIN-M/
WIN2000 and WIN-NT
− Explorer 5.0 and higher
− connecting cable, 9 core (1:1)
Limitations:
– allocation of inputs/outputs on
LON-bus not possible
PC-Setup (COM1):
Baudrate 9600 / 38400
Databits 8
Parity none
Stopbits 1
Protocol hardware
Receive buffer high
Transmit buffer low
To Next Page
Loading...
