Fire Safety & Security Products
Building Technologies
1583_o_en_−−_5
69
08.2005
5.4 Menu overview SWE330A
Each function group can be selected by a separate button on the screen ’main configuration’.
Function groups Accessed parameters
button ’System’
To define
− country version
– used add-on hardware modules
− application serial ports
− application serial ports
− printer parameters
− user interface
− inputs
button ’LON’ To define
– number and type of devices on LON-bus
– active mode on synoptic outputs
– active mode on inputs
button ’Line/Dev.’ To define the configuration of addressable line (SynoLOOP)
− line type (loop / stub)
− device type / attribute
To define the configuration of conventional lines (SynoLINE) (if K3M... is enabled)
− line type / attribute
button ’Zone’
fire zone
c
ontr. zone
To define the detector zone configuration
− zone type
− exclude horns / alarm contact / remote transmission
− exclude function ’detector test’ / disabling
− allocation parallel indicator
− assign user text
− link devices
To define
– zone related or common signal
– trigger (zone related = 8 trigger / common signal = 8 trigger)
button ’Element’ To define the element parameters (normally not used)
− user text (only to be done in special situations)
button ’Horn / Alarm Cont.’ To define
− sound mode of alarm horn on external alarm
button ’Alarm Organization’ To define the alarm organization (if used)
− switching mode
− time ’V1’ and ’V2’
− activation and sound mode of alarm horn on ’internal alarm’
− activation alarm contact on ’internal alarm’
− function ’dual mode’
− duration of mode ’manned’
− function ’extra time’
button ’Password’ To overwrite the default-passwords (if required)
− 8642 configuration
− 0011 editing of user text
− 0033 service function
− 0055 user operating
To Next Page
Loading...
