Fire Safety & Security Products
Building Technologies
1583_o_en_−−_5
71
08.2005
5.6 User application settings ’direct’ via keypad
Also possible via PC-tool SWE330A (see page 66)
Press «Start/stop» key and enter the password (0055 ok)
SELECT: 1. ENabling
(main menu) 2. DISabling
3. INFO polling
4. other functions
FUNCTIONS: 1. function
(4) 2. system TEST
3. printout
4. configuration
CONFIGURATION: 1. user functions
(4.4) 2. user text
3. service functions
4. erase functions
LCD-text shown is based on software program ’English international’
1. to define individual user functions
2. to define the individual user texts
3. to disconnect / connect addr. lines, control outputs, etc.
4. to erase event memory / alarm counter / user data / element
Select CONFIGURATION: 1. user functions
Enter > password?
SERVICE LEVEL: system configuration
> password?
hm: back to menu Stop: end operating
(Code 8642 ok )
to define basic functions and alarm organization
to define the collective lines (only if K3M010 or K3M020 is equipped)
to overwrite the 4 basic passwords
to define the addressable lines / logical detector zones and conTrol zones
for data transfer FC330A PC (see page 70)
to define the remote indicating and control equipment
to define the application on the serial ports
to define programmable inputs on K3X0x0 / K6
CONFIGURATION: 1. system data
(4.4.1) 2. collective line
3. password
4. addressable line
5. SWE330A
6. LON devices
7. serial ports
8. K6 inputs
Exit when user setting is completed by pressing key ”start/stop”
To Next Page
Loading...
