AT Command Set
TC3X_ATC_01_V04.00 Page 100 of 204 29.05.2002
SIM locks: These are factory set locks, such as "PF", "PN", "PU", "PP", "PC". An 8-digit unlocking
code is required to operate the mobile with a different SIM card, or to lift the lock. The
code can only be obtained from the provider.
Failure to enter the password is subject to the same timing algorithm as the Master
Phone Code (see
Table 8).
Call barring: Supported modes are "AO", "OI", "OX", "AI", "IR", "AB", "AG", "AC". If the call barring
password is entered incorrectly three times, the client will need to contact the service
provider to obtain a new one.
Summary of related chapters: Related +CME errors are listed in Chapter 7.1.1. For further
instructions and examples see Chapters 4.18 (AT+CLCK Facility
lock), 6.13 (AT^SLCK Facility lock, 4.34 (AT+CPWD Change
password) and 6.36 (AT^SPWD Change password for a lock. A
complete list of **# codes is provided in Chapter 7.4.
To Next Page
Loading...