Siemens TC37 Module - AT+CMSS Send SMS Message from Storage

AT Command Set
TC3X_ATC_01_V04.00 Page 132 of 204 29.05.2002
5.8 AT+CMSS Send SMS message from storage
Test command
AT+CMSS=?
Response
OK
Parameter
Execute command
+CMSS=
<index>[,<da>
[,<toda>]]
Response
TA sends message with location value <index> from message storage
<mem2> to the network (SMS-SUBMIT or SMS-COMMAND). If new
recipient address <da> is given for SMS-SUBMIT, it shall be used instead of
the one stored with the message. Reference value <mr> is returned to the
TE on successful message delivery. Values can be used to identify
message upon unsolicited delivery status report result code.
1) If text mode (+CMGF=1) and send successful:
+CMSS: <mr>[,scts>] OK
2) If PDU mode (+CMGF=0) and send successful:
+CMSS: <mr>[,ackpdu>] OK
3) If error is related to ME functionality:
+CMS ERROR: <err>
Parameter
<ackpdu> GSM 03.40 RP-User-Data element of RP-ACK PDU;
format is same as for <pdu> in case of SMS, but without
GSM 04.11 SC address field and parameter shall be
bounded by double quote characters like a normal string
type parameter.
<index> integer type; value in the range of location numbers
supported by the associated memory
<da> GSM 03.40 TP-Destination-Address Address-Value field
in string format; BCD numbers (or GSM default alphabet
characters) are converted into characters; type of
address given by <toda>
<scts> GSM 03.40 TP-Service-Centre-Time-Stamp in time-
string format.
<toda> GSM 04.11 TP-Destination-Address Type-of-Address
octet in integer format (when first character of <da> is +
(IRA 43) default is 145, otherwise default is 129)
<mr> GSM 03.40 TP-Message-Reference in integer format
Reference
GSM 07.05
Note