Siemens TC37 Module - AT^SMGL List SMS Messages from Preferred Storage

To Next Page

To Previous Page

AT Command Set

TC3X_ATC_01_V04.00 Page 158 of 204 29.05.2002

<mode> 0 unlock

1 lock

2 query status

<passwd> password

<class> integer or sum of integers each representing a <class> of information:

1 voice

2 data

4 fax

8 short message service

16 data circuit sync

32 data circuit async

64 dedicated packet access

128 dedicated PAD access

x combination of some of the above classes.

For example, the default setting 7 represents the sum of the

integers 1, 2 and 4 (call barring for voice, data and fax). The

value 255 covers all classes. If the <class> parameter is

omitted, the default value 7 is used.

See examples in 4.18.3 for the correct handling of class numbers.

<status> 0 off

1 on

Reference

Siemens

Note

See also specification of AT+CLCK in GSM 07.07 and further details in Chapter

4.18.

6.14 AT^SMGL List SMS messages from preferred storage

Test command

AT^SMGL=?

Response

See write command + CMGL

Parameters

See command +CMGL

Execute/Write

command

AT^SMGL

[=<stat>]

Response

TA returns messages with status value <stat> from message storage <mem1> to

the TE. The status of the messages is u n c h a n g e d (unread remains unread).

Otherwise: See command +CMGL