AT Command Set
TC3X_ATC_01_V04.00 Page 48 of 204 29.05.2002
3.9 AT+FDFFC Data Compression Format Conversion
Test command
AT+FDFFC=?
This parameter determines the ME response to a mismatch between the data
format negotiated for the facsimile session, reported by the +FDCS:DF
subparameter, and the Phase C data desired by the controlling application,
indicated by the optional +FDT:DF subparameter, or the +FDIS=DF
subparameter for the +FDR operation.
Response
(list of supported <df>s) OK
Parameter
See write command
Read command
AT+FDFFC?
Response
<df> OK
Parameter
See write command
Write command
AT+FDFFC =<df>
Response
OK
Parameter
<df> 0 Mismatch checking is always disabled. The controlling
application has to check the +FDCS: DF subparameter and
transfer matching data.
Reference
EIA PN-2388
Note
Used for Fax Class 2 only
To Next Page
Loading...