Siemens TC37 Module - AT+COPN Read Operator Names

AT Command Set
TC3X_ATC_01_V04.00 Page 89 of 204 29.05.2002
4.25 AT+COPN Read operator names
Test command
AT+COPN=?
Response
OK
Execute command
AT+COPN
TA returns the list of operator names from the ME. Each operator code
<numericn> that has an alphanumeric equivalent <alphan> in the ME memory
is returned.
Response
+COPN: numeric <numeric1>,long alphanumeric <alpha1><CR><LF>
+COPN:.....OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<numericn> string type; operator in numeric form; GSM location area
identification number
<alphan> string type; operator in long alphanumeric format; can contain
up to 16 characters
Reference
GSM 07.07
Note
See also AT^SPLM, pg. 173