AT Command Set
TC3X_ATC_01_V04.00 Page 142 of 204 29.05.2002
5.16 AT+CSMS Select Message Service
Test command
AT+CSMS=?
Response
+CSMS: (list of supported <service>s) OK
Parameter
See write command
Read command
AT+CSMS?
Response
+CSMS: <service>,<mt>,<mo>,<bm> OK
Parameter
See write command
Write command
AT+CSMS=
<service>
Response
+CSMS: <mt>,<mo>,<bm> OK
If error is related to ME functionality:
+CMS ERROR: <err>
Parameter
<service> 0 GSM 03.40 and 03.41 (the syntax of SMS AT commands is
compatible with GSM 07.05 Phase 2 version 4.7.0; Phase 2+
features which do not require new command syntax may be
supported, e.g. correct routing of messages with new Phase 2+
data coding schemes)
1 GSM 03.40 and 03.41 (the syntax of SMS AT commands is
compatible with GSM 07.05 Phase 2+ version; the requirement
of <service> setting 1 is mentioned under corresponding
command descriptions).
<mt> Mobile Terminated Messages:
0 Type not supported
1 Type supported
<mo> Mobile Originated Messages:
0 Type not supported
1 Type supported
<bm> Broadcast Type Messages:
0 Type not supported
1 Type supported
Reference
GSM 07.05
Note
If CSMS Mode is switched from Phase 2+ to Phase 2 and one or more CNMI
Parameter are Phase 2+ specific a '+CMS ERROR: unknown error' will apear. It is
recommended to switch the CNMI Parameters to Phase 2 specific values before
entering Phase 2.
To Next Page
Loading...