Siemens TC37 Module - AT^SCNI List Call Number Information

AT Command Set
TC3X_ATC_01_V04.00 Page 153 of 204 29.05.2002
6.8 AT^SCNI List Call Number Information
Test command
AT^SCNI=?
Response
OK
Execute command
AT^SCNI
Response
TA returns a list of current calls of ME.
[^SCNI: <id1>[,<cs>[,<number>,<type>]]]
[^SCNI: <id2>[,<cs>[,<number>,<type>]]]
[...] OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<idx> 1–7 integer type; call identification number as described in GSM
02.30[19] subclause 4.5.5.1; this number can be used in
+CHLD command operations
<cs> Call status of respective call number (first parameter)
0 call hold
1 call in progress
2 Waiting call
<number> string type phone number in format specified by <type>
<type> type of address octet in integer format; 145 when dialling string
includes international access code character “+”, otherwise 129
Reference
Siemens
Note
See also GSM 07.07: AT+CLCC