Jump-start by towing
This vehicle is not suitable for jump-
starting other vehicles by towing.
For technical reasons, it is not possible
to jump-start the vehicle by towing.
The vehicle’s exterior lighting consists
of LED bulbs, so to replace them,
please see a technical service shop.
The vehicle’s interior lighting consists
of LED bulbs, so to replace them,
please see a technical service shop.
Exterior vehicle lighting
Interior vehicle lighting
Fuses
The fuse box is behind the service
cover.
Remove the cover by unscrewing the
13 screws with a 4 mm Allen wrench.
The fuses are protected by a cover
that you must remove by pressing on
the right-hand side.
The cover includes a sticker on the
front that states the amperage of
each fuse.
If replacing:
• ALWAYS use fuses with the same
amperage.
• Using a fuse with higher amperage
can cause problems in the electrical
installation.
• Do not use other metallic elements as a
replacement for a fuse.
• NEVER repair fuses since this could cause
re.
WARNING
CAUTION
Before replacing any fuse, turn the vehicle,
lights, and electrical devices o.
Fig. 18 - Location of fuse box.
Fig. 19 - Fuse protection cover.
INFORMATION
If you have replaced the fuse and the
problem persists, you may use an electrical
contact cleaner.
Emergencies 33
MU_S04 MY23_EN - USER MANUAL S04 MY23 (V002)
To Next Page
Loading...
Need help?
General