3
Preface
Preface
Thank you for choosing a Silhouette CURIO2.
The Silhouette CURIO2 is a small cutting plotter. In addition to cutting marking lm and other media, a Silhouette
CURIO2 can also be used as a foil stamping or embossing by using specialty tools.
To ensure safe and correct use, be sure to read this User's Manual thoroughly prior to use.
After reading, please keep it in a safe place where you can nd it at any time.
Notes on this Manual
(1) No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, without the prior written permission of Silhouette Japan Corporation.
(2) The product specications and other information in this manual are subject to change without notice.
(3) While every effort has been made to provide complete and accurate information, please contact your sales
representative if you nd any unclear or erroneous information or wish to make other comments or suggestions.
(4) Notwithstanding the stipulations in the preceding paragraph, Silhouette Japan Corporation assumes no liability
for damages resulting from either the use of the information contained herein or the use of the product.
Registered Trademarks
All names of companies, brands, logotypes, and products appearing in this manual are the trademarks or
registered trademarks of their respective companies.
Copyright
This User's Manual is copyrighted by Silhouette Japan Corporation.
About the words and phrases in this text
• All names of products in this manual are referred as the "Silhouette CURIO2", except where specically noted.
• The Silhouette Studio screens that appears when Silhouette CURIO2 is connected to a Windows 10 environment.
The screen menu differs depending on the connected PC environments.
In addition, the screens and function names that have been provided is subject to change with the software
upgrade.
To Next Page
Loading...