Silhouette CURIO 2

41
Chapter 3 Cut using design data
3.1 Load a media
The media xing method differs depending on the media and tools used.
●Somemediacannotbexeddependingonthematerial.Inthatcase,xitusingtheattachedmasking
tape.
●IfairentersbetweentheElectrostaticBedandthemediawhenloadingthemedia,removetheair
beforecuttingandxthemediasecurely.
Supplement
1. Set the Electrostatic Bed on the CURIO2.
First, slide the clip outwards.
ClipClip
Slide the Electrostatic Bed all the way in and lock it after pushing the clip inward.
Clip
Electrostatic Bed
Clip
(1)
(2) (3)
2. Spread the Electrostatic Bed Protection Sheet on the Electrostatic Bed and place the media.
*Loadthemediabyaligningitwiththeupperleftcorner(origin).
Electrostatic Bed Protection Sheet
Origin
Media