Simplex 4100ES User Manual

11
A hardware reset reinitializes the state of certain hardware components and is typically used to
reset a Class A Trouble (for example, on a MAPNET, IDNet, or RUI channel) after the problem
causing the trouble is resolved. If you attempt to perform a hardware reset without first fixing the
problem causing the trouble, the hardware reset fails and the trouble reappears.
To perform a hardware reset, press the SYSTEM RESET key when no alarms are present.
Resetting the System, Continued
56BPerforming a
Hardware Reset

Simplex 4100ES Specifications

General

Type	Fire Alarm Control Panel
Display	LCD
Battery Backup	Yes
Model	4100ES
Manufacturer	Simplex
Communication Protocol	Optional Ethernet
Signaling Line Circuits (SLCs)	Up to 10
Notification Appliance Circuits (NACs)	Up to 10
Agency Listings	UL, FM, CSFM, MEA
Max Relay Circuits	20
Communication Ports	Ethernet
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity	Up to 93% RH, non-condensing