32
If the passcode entered in Step 5 is correct, the following message is shown.
After a brief pause, the system displays the granted access level, such as the level 2 message
shown below.
Press the <CLR> key twice. The display shows the system status, as shown below.
Failure to log out allows unauthorized personnel access to the various passcode protected
functions. If no keypad activity is detected for ten minutes, the system returns to Level 1 access.
Perform the following procedure to log out and return the operator access level to Level 1.
1. Press the <MENU> key. The following message is displayed.
2. Press the <ENTER> key. The following message is displayed.
Logging In and Out of the System, Continued
Enter a Passcode followed by <ENTER>
ACCESS GRANTED
1 = Login 2 = Logout
CURRENT ACCESS LEVEL = 2
1 = Login 2 = Logout
CURRENT ACCESS LEVEL = 2
Press <NEXT> or <PREVIOUS> to scroll
Change Access Level?
1 = Login 2 = Logout
CURRENT ACCESS LEVEL = 2
To Next Page
Loading...
