59
___________________________________________________________________________
When a Self-Test is run on a TrueAlert Zone, the TrueAlert ES appliances in that zone test their
notification components (strobe, horn or speaker) and report their results to the panel.
The TrueAlert ES appliance Self-Test feature is available for 4100ES FACPs revision 2.02 or
higher. This feature is compatible with all TrueAlert ES notification appliances.
Note: Legacy TrueAlert notifications appliances found in the tested zones will be diagnosed as “unsupported”,
they will not trigger a system trouble.
_______________________________________________________________________________
To launch the Self-Test, the user must navigate to the Diagnostic Menu and access the TrueAlert
Test menu. Figure 8-3 depicts the menu options and directories found under the TrueAlert ES
Self-Test option.
Figure 8-3. Self-Test Menu Overview
_______________________________________________________________________________
TrueAlert ES Appliance Self-Test
Self-Test Menus and
Options Overview
To Next Page
Loading...
