Simplex 4100ES User Manual

14
A Trouble message is used to indicate the presence of a circuit break or ground within a system
point, or somewhere between the FACP and one of its points.
This chapter describes using the Operator Interface Panel keys to investigate the details of the
trouble condition.
Refer to the page number listed in this table for information on a specific topic.
Topic
See Page #
Overview
15
Acknowledging Troubles
17
If the Trouble Doesn’t Clear
19
Chapter 3
2BTrouble Conditions
60BIntroduction
61BIn this Chapter

Simplex 4100ES Specifications

General

Type	Fire Alarm Control Panel
Display	LCD
Battery Backup	Yes
Model	4100ES
Manufacturer	Simplex
Communication Protocol	Optional Ethernet
Signaling Line Circuits (SLCs)	Up to 10
Notification Appliance Circuits (NACs)	Up to 10
Agency Listings	UL, FM, CSFM, MEA
Max Relay Circuits	20
Communication Ports	Ethernet
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity	Up to 93% RH, non-condensing