Simplex 4100ES User Manual

13
3. Press the <ENTER> key. The alphanumeric display shows the action taken.
Note: The system indicates a trouble condition each time a point is disabled. It is important to repair the
disabled point as soon as possible. Once repaired, the disabled point should be enabled as soon as
possible.
Disabling a Point that Remains in Alarm, Continued
Procedure
ALARM PRESENT, SYSTEM RESET ABORTED

Simplex 4100ES Specifications

General

Type	Fire Alarm Control Panel
Display	LCD
Battery Backup	Yes
Model	4100ES
Manufacturer	Simplex
Communication Protocol	Optional Ethernet
Signaling Line Circuits (SLCs)	Up to 10
Notification Appliance Circuits (NACs)	Up to 10
Agency Listings	UL, FM, CSFM, MEA
Max Relay Circuits	20
Communication Ports	Ethernet
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity	Up to 93% RH, non-condensing