Simplex 4100ES User Manual

35
The system records the time at which each alarm, trouble, and supervisory event occurs. You can
view this information in one of two ways:
 By displaying or printing the historical alarm or trouble log. Refer to “Displaying Historical
Logs” later in this chapter for information on doing this.
 By scrolling through the list of active alarm, trouble, or supervisory conditions, selecting a
specific event, and using the EVENT TIME key. Refer to the procedure below for
information on doing this.
1. Select the alarm, trouble, or supervisory event whose event time you want to display. To do
this, follow these steps.
a. Press the FIRE ALARM ACK, PRIORITY 2 ACK, TROUBLE ACK, or
SUPERVISORY ACK key to enter the appropriate list of events. (For example, press the
FIRE ALARM ACK key to enter the list of active fire alarms.)
b. Use the NEXT and PREVIOUS keys to scroll through the list until the alarm in which
you are interested is displayed.
c. Press the EVENT TIME key. The time at which the alarm, priority 2 alarm, trouble, or
supervisory occurred appears in the display.
25BViewing the Time at which an Event Occurred
90BOverview
91BProcedure

Simplex 4100ES Specifications

General

Type	Fire Alarm Control Panel
Display	LCD
Battery Backup	Yes
Model	4100ES
Manufacturer	Simplex
Communication Protocol	Optional Ethernet
Signaling Line Circuits (SLCs)	Up to 10
Notification Appliance Circuits (NACs)	Up to 10
Agency Listings	UL, FM, CSFM, MEA
Max Relay Circuits	20
Communication Ports	Ethernet
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity	Up to 93% RH, non-condensing